Product category:
Electrical and Electronic Testing
News Release from: TTi (Thurlby Thandar Instruments) | Subject: 2003RP power supply
Edited by the Manufacturingtalk Editorial
Team on 06 August 2004
3 Phase AC Supply With 675 VA Output Per
Phase
The California Instruments 2003RP power supply, now available exclusively in the UK from TTi (Thurlby Thandar Instruments), is a 3-phase AC power source with 675 VA output power per phase.
The California Instruments 2003RP power supply, now available exclusively in the UK from TTi (Thurlby Thandar Instruments), is a 3-phase AC power source with 675 VA output power per phase Offering simple rotary front-panel controls, it is ideally suited to a wide range of 3-phase power applications
This article was originally published on Manufacturingtalk on 2 Jul 2008 at 8.00am (UK)
Related stories
DC electronic load suits battery testing
An updated LD300 low-cost electronic load protect sources such as batteries from damaging levels of discharge when the source voltage falls below the user-selectable voltage dropout threshold.
Portable data logger
TTi is supplying the Yokogawa compact data logger for direct temperature and DC voltage measurements remotely
Front-panel digital rotary encoders are used to set voltage and frequency.
These controls combine an analogue 'feel' with the precision and reliability of digital circuits.
Settings and measurements are read directly on the large, high-contrast LCD displays.
Dual output voltage ranges of 0-135 V RMS L-N and 0-270 V RMS L-N provide maximum current at the required voltage.
The current available per phase is 2.5 A RMS on the 270 V range and 5.0 A RMS on the 135 V range.
The output frequency can be varied from 16 Hz to 5000 Hz to cover commercial, avionics and defence power applications.
An option (-OP1) including accurate measurement functions is available to eliminate the need for external test equipment in many test set-ups.
Voltage, current, peak current, power and power factor for each individual phase output can be read on the large LCD display or over the bus.
This option also includes IEEE-488 and RS232C remote-control interfaces.
All functions of the 2003RP are programmable via the interfaces.
The 2003RP measurements can be calibrated over the bus, lowering the cost of ownership.
Windows application software is included with the -OP1 option package.
This easy-to-use graphical interface program provides complete control over all instrument functions using the IEEE-488 or RS-232 interface.
With enhanced capabilities such as output sequencing, data logging and transient generation, many applications can be addressed without the need to write software.
With the option, units are capable of producing transients with a high degree of user programmability.
The setting up of transient programs is achieved using a Windows Graphical User Interface program allowing amplitude, frequency and event duration to be programmed from a PC.
The small form factor of the 203RP makes it convenient to use in a variety of locations.
The low 5.25-inch height also saves valuable rack space when used in a 'rack and stack' system.
A basic 2003RP unit costs 6695 pounds sterling (plus VAT).
• TTi (Thurlby Thandar Instruments): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
