Product category:
Special purpose joining equipment
News Release from: TWI (The Welding Institute) | Subject: Friction stir welding
Edited by the Manufacturingtalk Editorial
Team on 29 July 2005
Friction stir welding replaces TIG on
end caps
Manufacturer of solar assisted heat pump systems has improved quality and examined the potential to cut costs by using innovative friction stir welding technology.
A Leeds based manufacturer of solar assisted heat pump systems has improved quality and examined the potential to cut costs by using innovative welding technology, following feasibility trials by TWI under a regionally funded business support programme Endoenergy Systems are co-ordinating the Endohousing project - an initiative funded by the European Commission under the Energie Programme to investigate using renewable energy sources to supply heating and hot water in houses
This article was originally published on Manufacturingtalk on 25 Oct 2005 at 8.00am (UK)
Related stories
Aluminium 75mm thick plate friction stir welded
Friction Stir Welding has been used to join two aluminium plates 75mm (three inches) thick in a single operation - a big step forward from the previous thickness limit of 50mm.
Robots spot weld with friction stir process
System combines powerful friction stir welding technology with the flexibility of a robot to provide 3D welding techniques and also friction stir spot welding as an alternative to resistance welding.
Endohouses are designed to demonstrate the potential for making major savings in space heating and cooling costs in houses using endothermic technology.
A key feature of the energy saving system is the array of liquid filled aluminium panels that act as solar energy collectors and heat exchangers.
These panels can form the roof of the house, wall cladding, or could be a standalone structure.
Further reading
Robot friction stir welds 3D fabrications
Latest robotic friction stir welding equipment combines powerful friction stir welding with the flexibility of a robot and will be used by a UK research centre for 3D fabrication development.
Get wise on welding process' basics
A Web site covers the basics of welding and joining processes, including: arc, oxy-fuel, resistance, electron beam, laser and friction welding; brazing; plastics welding and surfacing.
Further information about these thermal systems can be found on the Endohousing website: www.endohouses.com.
The panels are constructed from aluminium extrusions with end-caps welded on to seal the units, and manifold connections to allow circulation of the liquid around the system.
The standard method of fabrication of the panels is TIG welding.
However, the end product is not totally satisfactory, in terms of cosmetic appearance and weld integrity.
Through the FriSC programme, TWI was able to offer Endoenergy the opportunity to fabricate the panels using friction stir welding.
The scope of the work included: * Designing the end-cap joint.
* Determining the tool design and welding parameters suitable for the fabrication.
* Designing the fixture for holding the assembly during welding.
* Completing welding trials.
* Testing the welded panels.
* Continued support after the completion of the programme, including provision of the process parameters required to produce satisfactory welds.
Success at each stage of the work demonstrated to Endoenergy that friction stir welding is a viable alternative for the fabrication of their panels, with several advantages over TIG welding, including ease of automation, speed of fabrication, minimal cosmetic post weld finishing operations and appearance of the finished weld.
For more information, please contact Jonathan Perrett at TWI.
The FriSC programme, supported by the European Regional Development Fund, South Yorkshire Objective 1 and Yorkshire Forward allows TWI to provide free and subsidised technical support to small and medium sized companies in the Yorkshire and Humber region, which, in the case of Endoenergy, equated to a product development programme with a value of GBP 15000.
If you think your company could benefit from similar assistance, please contact TWI Technology Centre (Yorkshire).
• TWI (The Welding Institute): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
