Product category:
Abrasive grinding wheels, abrasives
News Release from: Tyrolit Schleifmittelwerke Swarowski | Subject: Fastcut grinding disc
Edited by the Manufacturingtalk Editorial
Team on 13 April 2005
Grinding disc removes stock with smooth
finish
Grinding disc that combines high stock removal with a smooth finish in a shorter time is for use on angle grinders, and is suitable for use on steel and stainless steel.
Tyrolit has added to its successful Classic range with the introduction of the Fastcut grinding disc that combines high stock removal with a smooth finish in a shorter time For use on angle grinders, and suitable for use on steel and stainless steel (INOX), the depressed centre design incorporates a fibre reinforced resinoid bond with high resistance to breaking and side loads
This article was originally published on Manufacturingtalk on 21 Feb 2001 at 8.00am (UK)
Related stories
Part-off and groove in the 'dry'
Advanced Carbide Tooling has introduced Futura-coated carbide inserts for its 2.2 parting-off and grooving system, allowing dry machining as well as higher cutting speeds.
Largest range of parting-off and grooving tools
A claim that its Mircona parting-off and grooving tools is the largest single range currently available from any manufacturer is being made by the UK supplier Advanced Carbide Tooling
Visually the disc looks dramatically different.
Combining coarse, more aggressive grain layer distinctive by it's bright red colour, with a black, finer grain layer behind for a smoother final finish, Fastcut is ideal as an all round product for general metal fabrication work, particularly surface grinding and preparation and removal of weld seams where speed is of the essence! In common with every Tyrolit product, Fastcut is manufactured in accordance with all relevant European and international safety standards and is certified by The Organisation for the Safety of Abrasives (OSA).
Tyrolit Trade Division Manager, John Muckle, adds, "Fastcut is a leading edge product and we are confident it will quickly become a best seller".
"High stock removal and smooth finish achieved quickly and efficiently with one grinding disc, saves time and effort and vibration is also reduced because the disc is perfectly balanced to prevent any wobble effect during use." Classic Fastcut is available in sizes from 100mm to 230mm.
• Tyrolit Schleifmittelwerke Swarowski: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
