Product category:
Tubeworking: bending, cutting-off, profiling and end working
News Release from: Unison | Subject: All-electric tube bending machine
Edited by the Manufacturingtalk Editorial
Team on 11 May 2007
Electric tube bender reduces cycle times
An all-electric tube bending machine has automated the fabrication of highly complex aircraft tubular ducting components, performing multiple bends in one cycle.
The installation of a Unison all-electric tube bending machine is helping Senior Aerospace SSP to dramatically reduce cycle-time and improve efficiencies for fabricating aircraft duct components with complex shapes Tubular parts with multiple bends are now fabricated in a single machine stage, eliminating a manually-controlled hydraulic bending process that could take a week or more
This article was originally published on Manufacturingtalk on 25 Sep 2006 at 8.00am (UK)
Related stories
All-electric tube bender suits small batches
A 100mm/4in capacity, all-electric tube bending machine is optimized for precision small-batch/JIT processes and offers software-controlled changeover between batches, greatly reducing scrap.
Software ups electric tube bender productivity
Fabricators of tubular products can achieve higher standards of quality and productivity using Unison software tools for its all-electric tube bending machinery.
Senior Aerospace SSP makes ducting components for many of the world's leading aircraft manufacturers, for applications such as engine exhaust gas recirculation, de-icing systems, and air conditioning.
Most of the tubing parts are fabricated in small batches from exotic materials such as Inconel 625 and 718, and titanium.
Because of the space restrictions on most aircraft, parts often have complex three-dimensional shapes with closely-spaced bends.
Further reading
Module solves tube bending 'spring-back' problem
A laser measurement module, for all-electric tube bending machines, dynamically measures the accuracy of bend angles and overcomes the differences in material 'spring-back' from batch to batch.
Engineering company gains ISO 14001
Manufacturer of all-electric tube bending machine tools, Unison, has gained the the ISO 14001 standard for its Environmental Management System.
Thick-walled 'exotic' alloy tubes bent correctly
A novel metal 'springback' laser measurement, in-process correction system ensures tubing in thick-walled 'exotic' alloys are bent correctly first-time in all-electric tube bending machines.
Fabricating these using Senior Aerospace SSP's manually-controlled hydraulic bending machinery typically involved a start-stop process, with bends made one at a time.
This involved fitting the tooling and setting the machine up for each bend.
Bent parts would then be sent off for cleaning, and the exercise repeated for the next bend one or more days later.
So for parts with three or four bends, a complete fabrication cycle could often last a week or more.
To improve productivity, Senior Aerospace SSP invested in an all-electric tube bending machine from Unison, for tubing sizes up to 4in/100mm diameter.
The bending axes on this machine are based on software-controlled servomotors.
Tool settings for tube parts are stored in software, allowing the machine to be set up and a complete sequence of bends to be made in a single continuous process.
Several of the parts being made have such closely spaced bends that the machine is programmed to accommodate specially-designed compound tooling that grips the previous bend, because the straight sections between bends are too short for conventional clamping tools.
The machine also has the ability to stack as many as four bending tools at once onto the bending head.
This saves considerable set-up time by allowing a variety of jobs to be run without having to make a new set-up.
Tubing parts with multiple bends - which are typically fabricated in small batches of up to 20 with production cycle times ranging from several days to two weeks - are now almost invariably produced in a single shift.
Unlike the previous manually controlled bending process, these batches are also typically produced without any scrap, as the machine's closed-loop control maintains axis settings to a very fine resolution, regardless of variations in operating conditions such as temperature.
"The Unison machine has allowed us to trim days off the normal fabrication times for many of the complex tubing parts we produce, as well as eliminating intermediate cleaning processes," said Thomas Marshall, manufacturing engineer at Senior Aerospace SSP in Burbank.
"It's playing a valuable role in improving the productivity and flexibility of one of our key component production processes.".
• Unison: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
