Product category:
Thermal processing equipment (drying, curing, etc)
News Release from: Unitemp | Subject: Temperature ovens - flammable synthetic resins
Edited by the Manufacturingtalk Editorial
Team on 19 October 2006
Affordable temperature ovens treat
resins
Affordable temperature ovens - for drying and heat treatment of flammable synthetic resins or volatile solvents - have an explosion vent, which releases the explosion with a safety door.
Unitemp announce the availability of a new range of affordable temperature ovens, which are suitable for drying and heat treatment of flammable synthetic resins or volatile solvents They are equipped with an explosion vent which releases the explosion with a safety door for security
This article was originally published on Manufacturingtalk on 30 Jun 2008 at 8.00am (UK)
Related stories
Corrosion simulation chambers are affordable
Affordable corrosion chambers can simulate the effects of salt spray, fog, humidity, smoke and vehicle exhausts on extensive range of materials, paints and coatings.
Small weathering chambers test materials
Unitemp has introduced a range of low cost test chambers for the simulation of primarily of weather exposure on materials, plastics and metals.
These units are designed to prevent any damage to people or equipment in the vicinity for explosion pressures not exceeding 2.94Pa.
If the explosion exceeds 0.98Pa, reuse of the equipment may not be possible.
Designated the SPH(H) range from Espec, the range consists of eight models.
These high quality products are constructed outside with cold rolled rust proof steel plate coated in melamine resin, whilst the inside is stainless steel.
The temperature range is ambient 20 to 300 deg C using an established and proven forced hot air circulation and ventilation system.
Incorporated at the right hand top of the oven is an easy to read and operate control panel, giving details of the four programmed operations offered for use in the heat treatment and drying processes.
They are (1) constant temperature mode (2) automatic start/stop (3) stepwise mode, and (4) rapid mode, which takes the oven up a pre-set temperature gradient.
These models have a relative large processing capacity with internal dimensions of 450 x 450 x 450mm to 1000 x 1000 x 1000mm, and weigh 95kg to 500kg.
This range complements Unitemps extensive range of test and mnitoring chambers/ovens and they have the expertise to provide 'specials' to customers requirements.
These innovative products have applications in the electronics, engineering, laboratory, process, chemical and manufacturing industries.
• Unitemp: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
