Product category:
Airline equipment, filters, drains and traps, control systems, etc.
News Release from: VPInstruments
Edited by the Manufacturingtalk Editorial
Team on 21 August 2007
Compressed air meter is easy to install
An in-line mass flow meter for measuring compressed air now has detachable inlet and outlet piping to make installation and service much easier.
Improved design of the VPFlowMate in-line mass flow meter now has detachable in- and outlet piping This novel feature makes installation and service much easier
This article was originally published on Manufacturingtalk on 15 Feb 2006 at 8.00am (UK)
Related stories
Compressed air measuring terminal is robust
Terminal for measuring compressed air, energy monitoring and leak detection has been given a robust, shock-, dust- and waterproof housing and backlit display reads out actual and total flow.
The improvement was made by VPInstruments after a close interaction with its customers.
The change was made because piping and pipe thread were often damaged during installation.
Or the device needed a little change to fit a certain type of process connection.
The flow path of the VPFlowMate has been optimised and the temperature measurement has been greatly improved, all adding to more accurate results of measurements.
The VPFlowMate in-line can be used for the following.
* Compressed air.
* Nitrogen.
* Argon.
* Helium.
* Other non-corrosive, dry gases.
It offers a two-row display with flow and totaliser readout.
Output signals are RS232, 4-20mA and pulse.
Flow ranges are 0-30, 0-60, 0-120 and 0-750m3/h.
With all the improvements, VPInstruments said that the VPFlowMate is even more ideal for measuring compressed air.
• VPInstruments: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
