Product category:
Turning tools
News Release from: Walter GB | Subject: NM6 indexable turning insert geometry
Edited by the Manufacturingtalk Editorial
Team on 02 August 2004
Indexable turning inserts perform
interrupted cuts
Indexable turning insert geometry with negative basic shape and corner radii of 0.8mm, 1.2mm, 1.6mm and 2.4mm are designed for interrupted cutting on medium steels.
Walter GB Redditch has announced the new NM6 indexable turning insert geometry with negative basic shape and corner radii of 0.8mm, 1.2mm, 1.6mm and 2.4mm With CVD coatings for P20 and P30 applications, the inserts are designed for interrupted cutting on medium steels at cutting depths of 0.8mm to 7mm and at feed rates of 0.4mm and 0.6 mm/rev
A double-sided version is also available, and with twice the number of cutting edges compared with conventional, competing tools it can reduce tool costs considerably while also maintaining high process reliability.
• Walter GB: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
