Manual toggle presses are precise and easy to work

High performance manual presses are designed for precision operations with initial capital outlay recouped in a very short time for most work contracts.

The Mader range of high performance manual presses have been added to the workshop equipment available from Weber Automatic Assembly Systems.

These are economically priced presses which have been designed for precision operations with initial capital outlay recouped in a very short time for most work contracts.

Toggle presses with either round or square rams can be supplied, together with rack and pinion options which offer a constant pressing force over the entire stroke length.

A large throat version is also available to accommodate oversized components.

Typical workshop operations include assembling, stamping, riveting, caulking, punching, cutting and gluing.

These presses require relatively low operator effort (typically 150N), and are available in a range of press capacities from 5 up to 30kN.

They can all be supplied with precision ram adjustment (within 0.02mm) to ensure accurate positioning of the bottom dead centre or point of maximum force.

They all feature as standard an Ergopress laterally offset operating lever which is adjustable over 360deg and can be set for either left or right handed operation.

This versatility ensures that the machine can be quickly set up to suit individual operators or jobs in hand, to provide the optimum working conditions, with unobstructed view and leading to maximum production potential.

All models also have simple threaded spindle height adjustment of the press head, and feature a hardened and ground ram operating in a long, honed high-precision ram guide.

The extra rigid press bases incorporate work tables that are also ground for extra accuracy.

The square ram toggle presses cover the same capacities and enjoy the same features, with the additional benefits of: * Absolute torsional resistance with play-free movement.

* Large tool support surface minimising the need for tool guides.

They can also be fitted with a return travel lock, preventing partial stroke movement which increases workpiece quality, together with stroke counter and a table bore to facilitate rapid tool changing.

Rack and pinion presses can be supplied with one and 1.5kN press capacities and are suitable for extreme precision work, pressing in longer components or other long stroke operations.

Long throat presses, with 250mm throat capacity, can be supplied for 15kN operation.

All presses are manufactured for long trouble-free operation and designed to be virtually maintenance free.

Both pneumatic and hydro-pneumatically operated presses can also be supplied for semi or fully automated production.

Back to top