Product category:
Probes, sensors, tool detection for machine tools
News Release from: Walter Dittel GmbH | Subject: AE fluid sensor
Edited by the Manufacturingtalk Editorial
Team on 28 September 2007
Using cooling lubricant stream to detect
signals
A fluid acoustic emission sensor can detect acoustic emissions directly from the machining process, opening up a wide range of completely new monitoring opportunities.
Dittel's AE fluid sensor is the latest addition to the company's range of acoustic emission (AE) sensors for grinding machine process optimization By electrically and acoustically isolating the AE fluid sensor from the machine tool, Dittel has managed to suppress the machine's background noise
This article was originally published on Manufacturingtalk on 26 Jan 2006 at 8.00am (UK)
Related stories
Travelling column VMC has dual-pallet indexing
Vertical machining centre with a travelling column design and integrated rotary dual-pallet indexing system provides higher levels of productivity and output and efficient workpiece loading/unloading.
DROs designed to maximise productivity
Acu-Rite will be demonstrating its family of ergonomically designed digital read outs along with MILLPWR, its two and half axis control system at the EMO show.
The AE fluid sensor works on the principle of sound wave transmission through a stream of fluid.
The sensor unit is very compact and robust, and combines the advantages of both the rotating and the static AE sensors.
This development has led to a sensor that can detect acoustic emissions directly from the machining process, opening up a wide range of completely new monitoring opportunities that the current range of AE sensors was not capable of.
Further reading
DRO trade-in offer extended until June's end
Acu-Rite (GB) has announced an extension to its trade-in offer for used DROs until the end of June, so successful has the promotion been.
Millpwr 3 software and kit offer 3D machining
Millpwr 3 software and a retrofit 'kit' provide users of good quality turret millers a three-axis CNC 3D contouring capability.
If only we had CNC on our heavy machines
On visits to heavy engineering and power station maintenance shops, the production engineers there have often said: "If only we had CNC.... Acu-Rite now offers free feasibility studies to fit CNC.
The sound waves are transmitted through a fluid that has always been present in the machine tool: the cooling lubricant - either a water-based coolant emulsion or a so-called grinding oil.
The latter is often used in high power grinding processes involving hard, brittle materials.
In terms of wetting, grinding oil is the optimal choice for the generally dirty or oily, rotating metal surfaces and guarantees an ideal link between the sound waves and the sensor.
The stream can therefore be directed straight into the cutting process, to the tool, the workpiece or the clamping device.
A wide frequency range of acoustic emissions produced by various machining processes can be measured reproducibly and highly dynamically.
The coolant is fed to the AE fluid sensor via a 3m long, non-buckling polyurethane pipe that is resistant to most of the coolants in common industrial use and can be flexibly led in and around the machine tool.
The issue of joint damping, e g, in the head stock, that arises when performing measurements with standard AE sensors is not a problem when this method is applied.
By electrically and acoustically isolating the AE fluid sensor from the machine tool, the internal and background noise is effectively suppressed, making it possible to measure even the slightest acoustic emission signals.
When working with direct drive spindles, the associated electromagnetic interference makes the desired AE signal virtually unrecognizable to conventional AE sensors.
With the AE fluid sensor, on the other hand, the process can be monitored with far greater certainty.
Coolant pressure and flow rate are set with the aid of a pressure regulator, depending on the position and distance of the AE fluid sensor relative to the AE source in the cutting process.
The maximum length of the measuring stream and the related distance between the AE fluid sensor and the AE source depend on fluid viscosity.
When using grinding oil and a vertical stream, the distance between sensor and source ranges from a few millimeters to several centimeters.
Where space is limited, one can increase the distance and assemble the system further away from the AE source.
The integrated signal processing electronics in the AE fluid sensor can send the measured data to any one of Dittel's AE evaluation systems.
It is also relatively easy to retrofit the AE fluid sensor into existing systems without having to make major changes to the machine tool or spindle.
• Walter Dittel GmbH: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
