Internal deburring brushes remove all burrs

Internal deburring brushes, which easily remove all burrs found at intersecting holes, are designed to increase productivity of in-machine deburring in CNC machining centers.

Weiler Corporation, the leading manufacturer of power and abrasive nylon brushes for the manufacturing industry, is pleased to offer the Bore-Rx line of internal deburring brushes.

Designed to increase productivity of in-machine deburring in CNC machining centers, the Bore-Rx brushes easily remove all burrs found at intersecting holes and other internal edges of the work-piece and can also be used for bore finishing applications.

The Bore-Rx brushes provide a solution to the problem of removing internal edge burrs, which is often met using inefficient tube or 'bottle' brushes.

Tube brushes have several shortcomings but most notable is their lack of filament density, which determines aggression and life.

Bore-Rx brushes, however, have ten times more filament density allowing them to remove even well attached burrs and boast an expanded lifespan.

Further, tube brushes cannot be operated at high rev/min and are prone to untwist when used in both directions of spindle rotation.

Bore-Rx brushes correct these disadvantages by operating at high rev/min and rotating in both directions.

By using Bore-Rx brushes, off-hand deburring is eliminated, resulting in a decrease of direct labor content and increase in part-to-part consistency.

Available in sizes ranging from 3/4in to 4in in either wire or abrasive nylon filament, the Bore-Rx brushes can be adapted for use in end mill holders or can be mounted using 3/8in collets.

* About Weiler Corporation - Weiler Corporation, headquartered in Cresco, Pennsylvania, an ISO 9001 manufacturer of power and abrasive nylon brushes, abrasives and maintenance products, provides world-class service and surface conditioning solutions.

Back to top