Product category:
Electrical systems
News Release from: Werma Signaltechnik | Subject: 206-208 and 216-218 beacons
Edited by the Manufacturingtalk Editorial
Team on 31 January 2003
Beacons purposely designed for control
panels
A range of beacons are made in different sizes and are specially designed for the control panel or switch gear systems.
WERMA offers a range of beacons in different sizes specially designed for the control panel / switch gear programme The beacon series 206-208 and 216-218 have a diameter of 57mm and a height ranging from 53 to 69mm
This article was originally published on Manufacturingtalk on 30 Jul 2002 at 8.00am (UK)
Related stories
Signal tower offers high protection rating
Modular signal tower system offers high protection rating IP 65 for use in extreme conditions and long-life LED.
They are available in Permanent, LED or Flashing light versions.
The bulb in the permanent light beacon can be changed by simply removing the dome.
Connection is by means of 6.3mm spades.
Our small 231 installation beacon has a height when installed of 30mm and is 36mm in diameter.
These dimensions make it the ideal beacon for the control panel / switch gear programme.
An exceptionally high light intensity is achieved through the use of LED Chip-On-Board technology exclusive to WERMA.
Thanks to high quality workmanship and high protection rating IP65 the WERMA installation beacons remain unaffected by poor weather conditions.
All of the beacons are available in 24V, 115V and 230V versions.
• Werma Signaltechnik: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
