Product category:
Arc welding equipment, manual and automatic
News Release from: Wilkinson Star | Subject: 300A diesel powered welder generator
Edited by the Manufacturingtalk Editorial
Team on 02 March 2007
Diesel generator welder is rated at 300A
A diesel powered welder generator is rated 300A at 60% duty cycle with a safety critical 110V CTE 4kVA AC auxiliary output for running power tools and ancillaries equipment.
Wilkinson Star, the Worsley, Manchester based industrial equipment supplier and sole UK representative for MOSA engine driven welding and generating sets has launched the MOSA TS300-RW (PADS No 094/007036) diesel powered welder generator
This article was originally published on Manufacturingtalk on 21 Aug 2006 at 8.00am (UK)
Related stories
MMA 150A welder generator weighs just 34kg
An air-cooled MMA welder generator - rated at 150A/60% duty cycle - weighs only 34kg, and has chopped DC output that allows it to produce high quality smooth welding characteristics.
Multi-process 160A welder is low-cost
Low cost, single phase 160A multi-process power source uses inverter technology for MIG/MAG, MIG Brazing, MMA and DC TIG welding using a 230V 50/60Hz power supply or a generator.
This generator, which has been specifically modified to meet the requirements of Carillion Rail with the UK's Network Rail Approval (certificate number PA05/02503), is rated 300A at 60% duty cycle with a safety critical 110V CTE 4kVA AC auxiliary output for running power tools and other ancillary equipment.
Features of this generator include use with a separate heavy duty 300A wire feed unit for outdoor MIG/MAG welding, a 20m TC2-RW umbilical remote control and emergency stop button, infinitely adjustable electronic stepless welding current control whilst a Ruggerini RD210 twin cylinder air cooled diesel engine with 12V electric starting and operating at 3,000 rpm supplies the power.
The 23 litres fuel tank capacity produces an engine running time of 9 hours at 60% load.
Auto idle extends the engine life by automatic reducing the engine speed after 20 seconds.
The TS300-RW meets EC engine noise compliance regulations and the DC output produces smooth high quality welding characteristics, when using most welding electrodes including cellulose.
Options include heavy duty 10m x 50mm2 welding cables with Dinse plug and socket connectors, an inline digital welding amp and volt meter, whilst the PAR600-RW parallel welding control box allows two welder generators to be connected together for heavier duty welding.
Fixed handles and wheels provide easy mobility and the equipment livery is yellow and black for clear trackside recognition.
• Wilkinson Star: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
