Product category:
Arc welding equipment, manual and automatic
News Release from: Wilkinson Star | Subject: Cebora Sound MIG 3240/T Pulse at MACH 08
Edited by the Manufacturingtalk Editorial
Team on 29 April 2008
MIG/MAG/TIG/MMA welding power introduced
For serving the MIG/MAG/TIG/MMA welding processes, Wilkinson Star has introduced a compact, inverter based power source models rated at 300A.
Wilkinson Star launched the Cebora Sound MIG 3240/T Pulse compact power source at last week's MACH 2008 UK machine tool exhibition The Cebora MIG 3240/T Pulse inverter based synergic pulsed MIG/MAG/TIG/MMA compact welding power source is one of an existing range of MIG Pulse welding power sources which includes 400A and 500A models with separate wire feed units and compact single phase 200A model
This article was originally published on Manufacturingtalk on 21 Aug 2006 at 8.00am (UK)
Related stories
MMA 150A welder generator weighs just 34kg
An air-cooled MMA welder generator - rated at 150A/60% duty cycle - weighs only 34kg, and has chopped DC output that allows it to produce high quality smooth welding characteristics.
Multi-process 160A welder is low-cost
Low cost, single phase 160A multi-process power source uses inverter technology for MIG/MAG, MIG Brazing, MMA and DC TIG welding using a 230V 50/60Hz power supply or a generator.
The multi purpose 300A power source is a three-phase 400V machine rated 250A at 100% duty cycle and includes a four roll aluminium wire feeder.
Wilkinson Star told manufacturingtalk that the power source is ideal for general fabrication work, where 1.0mm mild steel or 1.2mm aluminium wires are used.
The power source also has a wide range of synergic programs installed as standard covering a comprehensive range of wire sizes and material thicknesses.
Customised programs can be installed using a simple upgrade procedure through the RS232 port.
The control panel is easy to use and self explanatory, said Wilkinson Star, allowing the user to select the following.
* Welding process.
* The correct application from customised programs.
* The required synergic welding program.
* Material thickness before welding.
* Gas test and wire inch facility.
As an option a double pulse model is available or can be retrofitted.
Cebora's new 6m water cooled 350A at 60% duty cycle, push-pull welding torch can be used with this power source, said Wilkinson Star.
• Wilkinson Star: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
