Product category:
Industrial gases and associated equipment
News Release from: Witt Gas Techniques | Subject: Free standing gas mixing systems
Edited by the Manufacturingtalk Editorial
Team on 01 November 2006
Free standing gas mixing systems for
hospitals
Free standing gas mixing systems supplied by Witt Gas Techniques are being used by one of the UK's leading NHS Hospitals to supply high purity air to their operating theatres and intensive care wards.
Free standing gas mixing systems supplied by Witt Gas Techniques, the Warrington based gas safety, control, mixing and analysis equipment supplier are being used by one of the UK's leading NHS Hospitals to supply high purity air to their operating theatres and intensive care wards The MG 50, 100 and 200 range of gas mixing systems are specifically designed for the generation of high purity (synthetic) air from oxygen (0-25% mixing range) and nitrogen
This article was originally published on Manufacturingtalk on 21 Aug 2001 at 8.00am (UK)
Related stories
New web site covers gas safety and control
Witt Gas Techniques has a new web site on the complete range of gas safety, control, mixing and analysis equipment supplied by the company, with downloadable technical information and manuals
They provide high process reliability utilising precision mixing, better than +/- 0.5% abs, 2 independent integrated oxygen analysers for permanent monitoring and documentation of the gas mixtures, whilst pressure sensors, monitor the gas supply.
If the inlet pressures become too low an optical alarm is triggered and the system is shut down until re-set.
A lockable protective door protects the required settings from alteration and the system has self-monitoring of the analysers.
The capacity range is from 0 - approx.
232Nm3/h dependent upon the model required.
They are easy to use with a knob controlling a proportional mixing valve and a percentage scale providing infinitely variable mixture settings with a setting accuracy of +/-1%.
Intermittent gas mixture withdrawal is possible from zero to the maximum flow capacity of the system.
Each system has a RS232 interface with ASCll- output of date, time and measurement value.
• Witt Gas Techniques: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
