Product category:
Drilling, boring and reaming
News Release from: WNT (UK) | Subject: WTX Mini series of solid carbide drills
Edited by the Manufacturingtalk Editorial
Team on 03 March 2006
Carbide drills down to 1mm have through
coolant
Self-centring solid carbide drills with through coolant - as small as 1mm diameter - have a new flute geometry that ensures optimum swarf control and evacuation.
As part of WNT's Mastertool range WTX Mini series of solid carbide drillis available in diameters between 1.0 and 2.9mm diameter in increments of 0.1mm, with each drill being available, as standard, in three lengths: 5D, 8D and 12D More remarkably is the fact that even the smallest diameter drill is available with through tool coolant
This article was originally published on Manufacturingtalk on 28 May 2004 at 8.00am (UK)
Related stories
Precision boring tools perform roughing, finishing
Precision modular boring tools provide users with roughing and finish boring capability through an extensive range of modular couplings and extensions.
These self-centring drills have been developed in conjunction with a completely new flute geometry that ensures optimum swarf control and evacuation, a critical element when drilling holes of this diameter and length.
Suitable for machining a wide range of materials the drills manufactured from micro-grain carbide and are coated with WNT's Ti 700 multi-layer coating.
"As with all product developments from WNT the target is to provide a cost-effective solution," said Glenn Stanton. Request a free brochure from WNT (UK) ...
"Our combination of quality products, high levels of free technical support over the telephone and face-to-face, in conjunction with guaranteed next-day mid-day delivers the perfect blend for profitable manufacturing in the UK.".
• WNT (UK): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
