Product category:
Milling cutters
News Release from: WNT (UK) | Subject: Mirrorworx face milling system
Edited by the Manufacturingtalk Editorial
Team on 24 May 2006
Face milling cutters replace grinding
operations
Face milling cutters that eliminate many grinding operations feature through coolant and twin, face mounted, inserts that can be adjusted in microns to produce surface finishes Rz ? 2.5 micron.
The recent introduction of the Mirrorworx face milling system by WNT is helping users to eliminate time consuming grinding operations To remain competitive UK manufacturing companies are being forced to investigate ways in which processes can be streamlined or eliminated
This article was originally published on Manufacturingtalk on 5 Apr 2006 at 8.00am (UK)
Related stories
'Mirror' face milling eliminates face grinding
A 'mirror finish' face milling system is helping users to eliminate time consuming grinding operations and is suitable for machining unstable workpieces and on machines with low spindle power.
In introducing Mirrorworx to the UK market WNT is providing them with an opportunity to remove the requirement for time consuming and, therefore, costly grinding operations.
The Mirrorworx cutters, which are manufactured by Pokolm for WNT, range in size from 42 to 100mm diameter and feature through coolant and twin, face mounted, inserts that can be adjusted in the micron range to produce surface finishes Rz ? 2.5 micron.
Two precision screws located in the face of the cutter facilitate this adjustment.
The insert geometry and cutter body design also deliver a very 'smooth' cutting action, making the Mirrorworx system suitable for machining unstable workpieces and for use on machines with low spindle power. Request a free brochure from WNT (UK) ...
• WNT (UK): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
