Product category:
Milling, boring and routing machines - manual and CNC
News Release from: Warwick Machine Tools | Subject: MTE Compact Plus bed mill
Edited by the Manufacturingtalk Editorial
Team on 18 March 2005
Universal spindle head does the job
economically
To avoid purchasing a 4-axis machine, engineering company chose a CNC bed mill with universal spindle head to mill, drill, ream and bore many of its smaller fabrications.
Barnsley-based Qualter Hall has installed an MTE Compact Plus bed mill with universal spindle head from Warwick Machine Tools to mill, drill, ream and bore economically many of the smaller fabrications it produces for the nuclear, railway, mining and other industries Said Production Foreman, Alan Greenwood, "We were using a 6000 x 1000 x 1700mm travelling column mill to machine some components that would fit on a machine with an X-axis one third the size
This article was originally published on Manufacturingtalk on 15 Oct 2002 at 8.00am (UK)
Related stories
Bed millers offer plenty of power
Aimed at toolmakers, bed-type CNC millers apply full spindle power from 225 rev/min upwards for heavy duty milling of mould and tooling steels.
No cartridges allows EDMs to work long cycles
EDM die sinkers that can filter electrolyte without having to change any cartridges means that they are able to operate continuously over long periods when machining nickel alloy turbine parts.
Clearly we needed to find a more cost-effective method of manufacture.
"The large machine has a programmable swivelling head which is necessary for producing holes in angled surfaces of some fabrications, as they are too big to rotate.
We therefore needed a universal-head mill but did not want to invest in a full 4-axis CNC machine.
Further reading
Wire EDMs can cut wide and deep tapers
These EDM machines are believed to be the first on the market to cut taper angles, in submerged mode, up to +/-30 degrees over the full X and Y axes.
Ram-type EDMs improve productivity and finish
Mouldmakers will see a considerable improvement in productivity and quality of surface finish attainable with a new range of ram-type electric discharge machining equipment.
The 3-axis MTE Compact Plus, on which the spindle angle is manually adjusted in one degree increments and whose axis travels are 2000mm x 800mm x 800mm, was the economic answer." A factor in favour of this Spanish-built machine was the Heidenhain control with digital drives, which is the same as that fitted to the travelling column machine.
Consequently it was an easy matter to transfer programs for machining the smaller components directly to the new mill and start production immediately.
In addition, Warwick Machine Tools offered a good price and prompt delivery.
Several different types of fabrication are currently put on the machine for nuclear and railway projects.
Two particular parts need the spindle head swivelled to the horizontal to complete the cycle, while on one fabrication the head, which has a built-in hydro-mechanical tool clamping system, is angled at seven degrees to the vertical to drill holes perpendicular to an angled surface.
Specification of the machine includes ISO 50 spindle taper suitable for heavy metal removal rates and 4.5 tonnes maximum workpiece weight.
Spindle speed is in the range 40 to 3,000 rev/min delivered by a 22kW AC motor via a two-speed helical gearbox.
Cutting feed is up to 4m/min and rapids of 10m/min ensure short non-machining times, although the latest MTE Compact Plus has an even better specification offering 10m/min and 15m/min maximum feed rate and rapid traverse respectively.
Each servo drive acts through a pre-loaded double-nut ballscrew.
Direct measurement using linear scales that resolve to 0.001mm avoids the inherent inaccuracy of rotary encoders and allows positioning accuracy to better than 10 microns and repeatability to within 7 microns.
• Warwick Machine Tools: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
