Product category:
Monitoring and sensor equipment and systems
News Release from: Eriks UK | Subject: High temperature encoders
Edited by the Manufacturingtalk Editorial
Team on 03 December 2003
Bespoke encoders achieve zero factory
downtime
A photographic paper manufacturing plant has achieved zero downtime using encoders that have high temperature compatible components and improved sealing.
Kodak's photographic paper manufacturing plant at Harrow has achieved zero downtime using bespoke replacement high temperature encoders from Wyko The harsh working environment caused standard high temperature shaft mounted encoders to fail after only two months use with the potential to cause over GBP 6,000 worth of downtime
This article was originally published on Manufacturingtalk on 19 Mar 2008 at 8.00am (UK)
Related stories
Thermography team fine tunes energy efficiency
A thermography department studied the heat and energy loss from other diverse areas of a brewery plant and offered a potential of saving up to GBP 60,000 in annual energy costs.
Transmission roller chain offers longer life
Transmission roller chain has solid rollers, manufactured to achieve an extremely high surface hardness, and to ensure high wear resistance in hostile environments as well as improving chain life.
The new encoders are designed and built to match the application conditions using high temperature compatible components, aluminium construction and improved sealing.
Kodak manufactures photographic paper in continuous batches that can take several days to process; large rolls of base paper are fed through a kilometre long track that spans four storeys and ends in the final drying section, which has an ambient temperature of between 60degC and 70degC.
Standard high temperature incremental encoders were being used to provide positional feedback information from several 1.5m width rollers used for speed and web tension control.
Further reading
Pulley groove gauge determines wear
Using a Fenner Pulley Groove Gauge to quickly determine if pulley grooves are worn or not allows maintenance engineers to make an informed and swift decision on remedying any potential problem.
Gearboxes, gearmotors gain Baseefa certification
Fenner gearboxes and gearmotors have recently been awarded certification by Baseefa for use in ATEX Zones 1 and 2 (gas) and Zones 21 and 22 (Dust) atmospheres.
Right angle gearboxes offer 20% energy saving
Right angle bevel helical gearboxes have efficiency levels of up to 97% and are designed to replace worm and wheel gearboxes in a wide range of applications, including cranes and conveyors.
The high ambient temperature meant that grease lubrication in the bearings was breaking down, leading to seizure.
The standard units were being replaced every two months in an operation that took around 11/2 hours.
If a natural break in production was not available, the downtime costs are GBP 70/minute; hence the replacement Wyko items provide a potential GBP 6,000 saving every two months.
Without effective feedback, consistent exposure of the paper and the smooth winding on and off of the paper rolls is at risk, hence if an encoder starts to fail, it has to replaced at the first opportunity.
If a seizure occurs during a process batch the result is even worse, as the entire process is carried out in the dark to avoid exposure of the chemicals and paper.
If light enters the process area during a batch process the whole batch can be lost causing thousands of pounds to be lost in production time and materials.
In order to avoid both frequent replacements and breakdowns, Wyko have supplied bespoke encoders that are rated to operate in a 1200degC ambient temperature, using high temperature sealed grease lubricated bearings, aluminium component mounting discs to dissipate heat and machined Aluminium cases.
The encoders are equipped with the latest generation ASIC and employ an auto-calibration feature to offset the effects of large variations in temperature.
All but the prototype encoder are still in operation after twelve months and carry a 3-year warranty.
The mounting design has also been changed from an awkward collet arrangement to a slot and grub screw fixing, making fitting far easier and possible in limited lighting conditions.
An added benefit of the bespoke design is that the new encoder has been designed to fit both of the two sizes of standard encoder employed on the Kodak machine using a simple 24mm sleeve.
The pin arrangement of the original units has also been matched so the new encoders can be fitted ready to plug and play.
Only one encoder type is now kept in stock and routine replacements take minutes rather than 11/2 hours.
Kodak are so pleased with the result of Wyko's encoder on this machine that they have employed similar solutions on other equipment such as mixers and seen similar savings in downtime and lost production.
Victor Harris of Wyko's Electronic Repairs Division comments, 'the encoder market has suffered in a similar way to other industrial products that have become commodities, prices have been driven down and quality has suffered.
Standard encoders are often part of a package sold on cost and although they work adequately in mild operating conditions, any excess vibration, temperature or ingress of moisture can cause failure.
The need to find an alternative arose first from Wyko's industrial electronics repair business, our own requirements meant that we had to be able to supply a flexible and robust design of encoder that could be assembled to meet varying cost and environmental demands.
The product we are now able to offer has many options such as bespoke circuits with very high t emperature mounts, sealing up to IP68 can be achieved and a variety of machined cases up to marine grade stainless steel. Request a free brochure from Eriks UK ...
Having achieved this, demand is extremely high for the product and Kodak is a good example of a finished unit in action.'.
• Eriks UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
