Product category:
Electrical and Electronic Testing
News Release from: Eriks UK | Subject: Load test and torque calibration rig
Edited by the Manufacturingtalk Editorial
Team on 12 September 2005
Test rig guarantees servo motor
performance
A load test and torque calibration rig for a servomotor repair business is based on a non-contact torque sensor that could effectively be isolated from damaging shock loads.
Reliability and robustness were the key requirements when Wyko Industrial Services set about building a load test and torque calibration rig for its servomotor repair business in Aintree near Liverpool They based their design on a non-contact torque sensor that could effectively be isolated from damaging shock loads
This article was originally published on Manufacturingtalk on 19 Mar 2008 at 8.00am (UK)
Related stories
Thermography team fine tunes energy efficiency
A thermography department studied the heat and energy loss from other diverse areas of a brewery plant and offered a potential of saving up to GBP 60,000 in annual energy costs.
Transmission roller chain offers longer life
Transmission roller chain has solid rollers, manufactured to achieve an extremely high surface hardness, and to ensure high wear resistance in hostile environments as well as improving chain life.
The test rig enables Wyko to provide full test and performance certification with every repaired servomotor.
The argument for conducting the routine maintenance and overhaul of servo systems can be clearly demonstrated by one of the UK's major car plants, where servo equipment on the production line is removed, checked, refurbished and returned to service by Wyko every five years, as a result, there have been zero failures to date.
Companies such as this also require comprehensive documentation to support any work that is done on plant equipment, something the new rig is designed to provide.
Further reading
Pulley groove gauge determines wear
Using a Fenner Pulley Groove Gauge to quickly determine if pulley grooves are worn or not allows maintenance engineers to make an informed and swift decision on remedying any potential problem.
Gearboxes, gearmotors gain Baseefa certification
Fenner gearboxes and gearmotors have recently been awarded certification by Baseefa for use in ATEX Zones 1 and 2 (gas) and Zones 21 and 22 (Dust) atmospheres.
Right angle gearboxes offer 20% energy saving
Right angle bevel helical gearboxes have efficiency levels of up to 97% and are designed to replace worm and wheel gearboxes in a wide range of applications, including cranes and conveyors.
The proven success of the service has led to increased demand and this is another of the main reasons why a replacement test rig was required; a higher capacity, improved reporting and greater accuracy were all necessities.
Typically routine servicing is based on four or five-year cycles and can be planned for, whereas a large amount of servo equipment installed during the nineties is starting to require attention.
The increasing number of breakdown situations that Wyko are dealing with illustrates this.
Breakdowns have to be acted upon immediately due to the obvious downtime implications, and put added pressure on both the repair team and the equipment.
The test rig therefore has to be correspondingly robust.
"We knew the rig would be in virtually constant use, so wanted to design out breakdowns as far as possible," said Vic Harris Wyko's director for Electronic Developments.
"Unexpected stoppages would be disruptive to us, but potentially disastrous to our customers who often run 24 hours a day and therefore need to manage their spares and repairs with military precision." Wyko's clients include BAE, transmission giants Ford Getrag and several of the food processing majors, alongside many smaller companies.
Basically the rig runs the test motors against a 22kW DC spindle motor controlled by a Sprint Electric four quadrant DC drive which is switchable between 'speed' and 'torque' modes to give both back driving and load testing capabilities.
Back driving the servo motor is very important because it lets Wyko capture the set up data for each servomotor before it is dismantled, which in turn makes recalibration quick and simple.
Harris says he selected a Torqsense non-contact sensor, made by Sensor Technology, because it was the most advanced solution he could find and its non-contact characteristic isolates it from shock loads.
"The torque sensor is rated at 20Nm and can take 400 per cent overload, so it can cope with just about anything it is ever likely to experience on our rig".
"To be extra safe we have mounted it using Fenner Jaw coupling on both shafts, with the rubber inserts selected to take the sting out of any unforeseen shock loads." Torqsense monitors the shaft under test using a radio transmission head, which both supplies power to and picks up signals from two tiny piezo ceramic combs attached to the shaft.
Rotational torque in the shaft contracts or stretches the combs, altering their radio emission signals in proportion to the torque experienced.
Harris adds: "Sensor Technology also supplied us with a software suite, Torqview II, which interprets the sensor's output signal in real time and presents it in ease-to-understand graphic form".
"It also logs and analyses the data, so we can print out a pass certificate for each tested motor." Thanks to the new test rig, Wyko's servo repair capacity has increased, and repaired servo motors now carry the same guarantee as the majority of new products (up to 12months).
The rig also provides data on units as they arrive for service, allowing performance data to be compared and helping to identify potential problems before any work is carried out.
Wyko also supply a full range of new automation equipment, ensuring a replacement is always at hand in the event that a motor should prove uneconomic to repair. Request a free brochure from Eriks UK ...
• Eriks UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
