Product category:
Materials Testing
News Release from: YSI Hydrodata
Edited by the Manufacturingtalk Editorial
Team on 09 October 2006
Monitoring the water column in a london
reservoir
YSI Hydrodata (stand 51) will run a Workshop at WWEM entitled 'Monitoring the Water Column in a London Reservoir to Improve Intake Quality'.
YSI Hydrodata (stand 51) will run a Workshop at WWEM 'Monitoring the Water Column in a London Reservoir to Improve Intake Quality' The presentation will describe YSI's new Profiler and discuss the advantages that have been gained through its deployment in reservoirs
This article was originally published on Manufacturingtalk on 17 May 2006 at 8.00am (UK)
Related stories
Luminescence-based dissolved oxygen sensor
A luminescence-based dissolved oxygen sensor from YSI offers powerful tool for making long-term oxygen measurements in severe fouling and low-oxygen environments.
A Case Study will be presented describing the benefits that have been gained following the installation of a Profiler at Thames Water's Queen Mother Reservoir near London's Heathrow Airport.
The monitoring system is able to move through the entire water column taking and recording water quality measurements automatically, thereby helping to improve water management decisions.
YSI has launched three new Profilers - buoy mounted, pontoon mounted or fixed-site.
Each of these is able to take measurements at user-defined intervals throughout a water column up to a maximum depth of 100 metres, recording at minimum intervals of 0.5m.
The Profilers are able to interface with any of the YSI multiparameter 6-series measurement sondes and as such offer the opportunity to record a wide variety of water quality parameters.
YSI Hydrodata's stand will also feature the latest technologies for water quality, level and flow data collection.
• YSI Hydrodata: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page

