Yuasa Warwick Machinery web site, latest news and contact details

Address:
Budbrooke Road Industrial Estate
Budbrooke Road
Warwick
CV34 5HG
UK
Telephone: (UK) +44 1926 497806

Listing of all 28 news releases from Yuasa Warwick Machinery:

Hig volume, four axis production cell launched

A new twin-pallet, horizontal machining centre from Enshu has 1.5 g acceleration in all axes, 60 m/min rapids, up to 15 m/min cutting feed rate and a BT30 13,000 rpm spindle motor

News from Yuasa Warwick Machinery (28 October 2003)

New twin-pallet, horizontal machining centre out

A twin-pallet, horizontal machining centre is available in the UK for demonstration at Yuasa Warwick Machinery, sole UK agent for the Japanese manufacturer, Enshu

News from Yuasa Warwick Machinery (23 October 2003)

Deburring centre performs five-axis finishing

A 5-axis CNC deburring centre carries out automated deburring and light machining of cast or pre-machined metal components, so eliminating tedious and costly hand finishing.

News from Yuasa Warwick Machinery ( 2 September 2003)

Plenty of power built into mill-turn centre

A powerful, high torque mill-turn centre with an 18/15kW main spindle motor driving a chuck of up to 10 inches in diameter also has an opposing spindle with a six inch chuck.

News from Yuasa Warwick Machinery ( 2 July 2003)

Minimising non-cutting times hold down costs

User application article A machining centre's ability to minimise non-cutting times and hence maximise productivity, helped to keep down unit manufacturing cost and allow competitive subcontract prices.

News from Yuasa Warwick Machinery (25 March 2003)

Hybrid linear/ballscrew HMC shortens cycle times

Hybrid horizontal machining centre is 25% less of cost of an all-linear axis drive HMC and offers cycle times of typically one third faster than all-ballscrew axis driven types.

News from Yuasa Warwick Machinery ( 3 March 2003)

Opposed twin-spindle lathe turns shafts too

A recent entrant to the Y-axis lathe sector is a twin opposed spindle lathe that offers shaft turning or sequential front- and back-working of chuck-type components.

News from Yuasa Warwick Machinery (29 January 2003)

Six-axis gantry robot loads lathes quickly

A new gantry loader carrying a full 6-axis articulated-arm robot allows large and/or complex shaped parts to be loaded quickly into CNC lathes.

News from Yuasa Warwick Machinery (19 December 2002)

Twin spindle CNC lathes improve quality, accuracy

User application article Acquisition of a pair of twin-spindle CNC lathes has brought significant improvements in production flexibility, quality, accuracy and lead time at Floform, Welshpool.

News from Yuasa Warwick Machinery ( 9 December 2002)

Twin-spindle CNC lathe automates drill and tap

User application article Acquisition of a twin-spindle CNC lathe has allowed Barton Coldform to automate a drilling and tapping operation on cold headed assembly studs.

News from Yuasa Warwick Machinery (25 October 2002)

CNC lathe holds turned dimensions within 5 micron

Five microns maximum variation over time in the accuracy of a turned component is claimed by the Japanese lathe builder for its new, compact CNC lathe, selling at GBP 59,000

News from Yuasa Warwick Machinery ( 5 August 2002)

Pallet change time is maybe the fastest yet?

Not only does the Kira Cheetah VMC feature even faster rapid traverse and spindle speeds and halved tool change time, pallet change time is just 1.7s - faster than many ATCs.

News from Yuasa Warwick Machinery (30 January 2002)

Enshu introduces a BT30 taper spindle HMC

Upgrading of the Enshu JExxS range of horizontal machining centres has included the addition of a new model, the JE30S, which is the first BT30 taper machine from this Japanese manufacturer.

News from Yuasa Warwick Machinery ( 7 November 2001)

Enshu doubles rapid traverse rates for VMCs

Three new, high speed, vertical machining centres have been introduced by Yuasa Warwick Machinery, sole UK agent for the Japanese machine tool builder, Enshu.

News from Yuasa Warwick Machinery (11 October 2001)

Long-bed mill ups subcontractor's capabilities

User application article To expand its aerospace sub contracting machining services, Avionic Components has invested GBP390,000 in a 6m long-bed CME travelling column CNC bed mill.

News from Yuasa Warwick Machinery ( 3 August 2001)

Three lathes produce couplings 50% faster

User application article Three Takamaz XD-10 lathes, each equipped with integral gantry load / unload, are providing cost effective method of producing high pressure hose couplings and adaptors.

News from Yuasa Warwick Machinery (31 May 2001)

Two lathes built into one

Sequential machining of the front and reverse ends of one component or simultaneous machining of two separate components are equally effective on the new Takamaz XW-180 twin-spindle CNC lathe.

News from Yuasa Warwick Machinery ( 1 May 2001)

CNC bed mills ensure on-time mould deliveries

User application article R.M Tool and Die (RMT) was founded in 1987 to provide a rapid response service to industry. Three CME CNC bed mills ensure on-time delivery of moulds.

News from Yuasa Warwick Machinery (21 March 2001)

Continuous investment in CNC EDM pays off

User application article Operating from a purpose-built factory with a total workforce of 48 personnel, Superite invests in high speed machining, hard metal turning and ONA's CNC spark erosion to make quality tools.