Product category:
CNC automatic lathes
News Release from: Yuasa Warwick Machinery | Subject: Takamaz X-15 Hi-Server lathe
Edited by the Manufacturingtalk Editorial
Team on 14 July 2000
Automated production for engine gears
Rochdale-based Renold Gears has installed two Japanese-built machine tools with automatic component load/unload in a production line for parts for Perkins Shibaura Engines
Rochdale-based Renold Gears has installed two Japanese-built machine tools with automatic component load / unload, a Takamaz X-15 Hi-Server lathe and a Kira KN30VE twin-pallet machining centre, to form part of a line for producing gears for the 1100 Series engines which power small excavators and mini diggers assembled by Perkins Shibaura Engines Ltd (PSEL) in Peterborough One of the largest manufacturers in the UK of worm reduction and helical gearboxes ranging from 30 mm to 710 mm between centres, Renold Gears secured in 1997 a 10 year contract from PSEL to supply three families of crank, cam and idler gears
This article was originally published on Manufacturingtalk on 31 May 2001 at 8.00am (UK)
Related stories
Three lathes produce couplings 50% faster
Three Takamaz XD-10 lathes, each equipped with integral gantry load / unload, are providing cost effective method of producing high pressure hose couplings and adaptors.
Repeatable EDM accuracy gives die maker the edge
Ona wire EDM cell cuts hollow or solid, simple or complex shapes and single or multi-cavity dies with repeateable accuracy.
In addition to these nine parts, a gear component for a Volvo engine was included in the agreement.
As is so often the case with automotive subcontract work, margins were tight.
Renold Gears decided that to make the business pay they needed an automated production line dedicated to this work and set about researching the market for suitable equipment.
Further reading
Five-axis machining centre for complex components
A compact five-axis machining centre, the Ohtori Kiko OSU-545, suited to machining highly complex components has been introduced by Yuasa Warwick Machinery.
Better performance claim for slant bed lathes
Superior productivity, finish and precision are claimed for the Hakusui HTL Series of CNC slant bed lathes from Japan, available in the UK from Yuasa Warwick Machinery under a new agency agreement.
More compact, five-axis machining centre
A compact, five-axis machining centre suited to producing highly complex components to close tolerances has been introduced by Yuasa Warwick Machinery.
The intention was to progress from raw steel forgings to finished components with minimal manual intervention.
The final configuration, in addition to the Takamaz and Kira machines sourced through Yuasa Warwick Machinery, comprised a Murata twin-spindle lathe, a Mitsubishi gear hobber, a Cardinal broach, a F?ssler gear hobber (the only non-automated machine) and two special purpose assembly rigs.
Automatic gauging stations were included between the machines to check sizing and quality of gear teeth, the latter being finished to JIS4.
Said Neil Felton, then Head of Production Engineering at the Rochdale factory, "During machine evaluation we were looking for a twin-pallet, light-duty, vertical machining centre or a turret drill to engrave a timing mark and complete all drilling operations.
"It was difficult to find a machine small enough for such a simple requirement, let alone one with automatic component load / unload as standard.
"We were fully expecting to have to over-spec the machine and retrofit the automation, with all the attendant disadvantages which that brings in terms of interfacing problems and split responsibility for servicing." However, a visit to Yuasa's showroom in Warwick revealed the existence of the 10-station, turret-type Kira with twin pallets as standard, which Mr Felton considered to be of good build quality and which fitted the requirement exactly.
Furthermore, there was an auto-load version of the machine in the catalogue on short delivery and it was even possible to choose from three variations of robot loading.
So the order was placed for a pallet change machine with gantry loader.
A hydraulic fixture package was supplied with the machine.
Drilling and countersinking are performed in the first operation while Op 2 involves deburring and engraving the timing mark, all in a very fast cycle time of two minutes.
There is a tight angular tolerance between the timing mark and the gear teeth but acceptance trials were no problem whatsoever.
While in the Yuasa showroom Mr Felton saw a small lathe, the Takamaz X-15 Hi-Server, which also had automation equipment factory-fitted as standard.
Again, it was very unusual to find a machine of that specification in a catalogue, certainly in 1997.
Renold Gears was looking at hard turning the gear components instead of grinding them and trials were carried out on the Takamaz to check the feasibility of this.
At the time, Renold Gears had proved hard turning to be a viable process but were not using it in a mass production environment, although this would soon change.
The idler gear required hard turning of the bore, spigot OD and gear faces, one of which is machined using a back-facing tool.
There are holes drilled through the spigot so both the boring and OD turning operations involve intermittent cutting.
The crank and cam gears have an external keyway and also present an intermittent cutting challenge as well as requiring hard boring.
The steel forgings are pre-hardened to Rc 58 - 62 and all cutting was performed dry using CBN tooling.
The trials were remarkably successful and all results were checked independently by PSEL.
A surface finish of Rz 2.5 was achieved, twice as good as specified on the drawings.
Dimensional tolerances on bore and OD were 20 microns.
Additionally, cycle times were in the region of 30 seconds, around eight times faster than grinding.
The order for a gantry loaded Takamaz was placed immediately after completion of the evaluation exercise.
Capability trials were carried out for all machines in the line, initially at the supplier, then on delivery and finally three months after commencement of production runs.
Cm = 1.67 was required and both Yuasa machines "sailed through", according to Mr Felton.
An up-time guarantee of 96 per cent over a 15 month period was written into the contract and a creditable 98 - 99 per cent has been achieved in practice for both machines during the first two years of two shift operation.
• Yuasa Warwick Machinery: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
