Product category:
CNC lathes
News Release from: Yuasa Warwick Machinery | Subject: Enshu JE30S
Edited by the Manufacturingtalk Editorial
Team on 23 October 2003
New twin-pallet, horizontal machining
centre out
A twin-pallet, horizontal machining centre is available in the UK for demonstration at Yuasa Warwick Machinery, sole UK agent for the Japanese manufacturer, Enshu
A twin-pallet, horizontal machining centre, fully configured as a new standard package for high volume production of complex components within a 500 x 350 x 300 mm working envelope, is available in the UK for demonstration at Yuasa Warwick Machinery, sole UK agent for the Japanese manufacturer, Enshu Designated JE30S, it is a high productivity machine with 1.5g acceleration in all axes, 60 m/min rapids, up to 15 m/min cutting feed rate and a BT30 13,000 rpm spindle motor (20,000 optional) which reaches full speed in just 0.38 sec from a standing start
This article was originally published on Manufacturingtalk on 7 Nov 2001 at 8.00am (UK)
Related stories
Enshu introduces a BT30 taper spindle HMC
Upgrading of the Enshu JExxS range of horizontal machining centres has included the addition of a new model, the JE30S, which is the first BT30 taper machine from this Japanese manufacturer.
Three lathes produce couplings 50% faster
Three Takamaz XD-10 lathes, each equipped with integral gantry load / unload, are providing cost effective method of producing high pressure hose couplings and adaptors.
Repeatable EDM accuracy gives die maker the edge
Ona wire EDM cell cuts hollow or solid, simple or complex shapes and single or multi-cavity dies with repeateable accuracy.
The incorporation of an armless servo motor driven ATC and the option of broken tool detection inside the magazine contribute to the machine's reliable production capability.
Yuasa points out that for a capital investment of a little over ?110,000, a company can acquire the cell complete with full NC B-axis (as opposed to an indexing rotary table), 30-tool magazine, through-tool coolant, and a comprehensive swarf management system including bed wash, ceiling-mounted coolant nozzles and back wash coolant pumps.
There are no extras to pay for and the machine is ready to run 24/7 immediately following installation, as initial programs will usually have been written by Yuasa applications engineers as part of the sale.
The machine meets Enshu's 5,000 hours mean-time-between-failure reliability standard, as do all the manufacturer's latest models.
Measures have been taken to minimise operational power consumption, which is now 30 per cent lower than for previous machines.
The JE30S is also available in single-pallet version as well as in line-transfer format for production line applications.
The latter has dictated that all axis movements are on the column, supported on recirculating rolling element linear bearings.
Ballscrew expansion compensation is available as an option.
There is a choice of CNC system - either Yaskawa or Fanuc 21 iM.
• Yuasa Warwick Machinery: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
