Product category:
Materials Testing
News Release from: Yokogawa Europe - Test and Measurement | Subject: VC200 W-CDMA
Edited by the Manufacturingtalk Editorial
Team on 19 November 2004
Mobile phone tester for W-CDMA/UMTS
The new Yokogawa VC200 W-CDMA (3G) mobile phone tester has been specifically developed for use in mobile phone service and repair centres, and is the world's first 'go/no-go' tester for UMTS.
The new Yokogawa VC200 W-CDMA (3G) mobile phone tester has been specifically developed for use in mobile phone service and repair centres, and is the world's first 'go/no-go' tester for UMTS Operation is simple, with an 'autotest' mode that any service technician or unskilled operator can use
This article was originally published on Manufacturingtalk on 16 Nov 2004 at 8.00am (UK)
Related stories
Accurate power analyser has wide frequency range
Precision power analyser that combines an exceptionally high accuracy with a wide frequency range can carry out up to four power measurements simultaneously.
Software aids IC engine pressure analysis
IC engine software package allows analysis and display of multiple data simultaneously, so that results can be checked simultaneously with online monitoring.
With a large 'one touch' start button, the VC200 automatically tests the essential functions and performance of the mobile phone in less than one minute, and then displays 'pass' or 'fail'.
'Mobile phone servicing and repair are big business, but until now their operations have been constrained by the fact that they have used expensive and time-consuming test instruments that were originally designed for research and development', comments Clive Davis, Yokogawa's European Marketing Manager for communications products: 'Now, with the VC200, they have an instrument with the highest performance and optimum ease of use for only one-fifth of the cost.' Yokogawa has worked closely with mobile phone manufacturers to ensure that the VC200 met their requirements on features, specifications and price.
As a result, it is expected that major vendors will recommend it as a preferred tool to their accredited service partners and repair centres.
Further reading
Precision power analyser functions enhanced
Precision power analyser now has 30Mbyte of internal memory and a standard auto-print function, while USB and Ethernet options provide enhanced communications with PCs.
Jitter meter aids optical disc production tests
Yokogawa has introduced a new version of its TA220 digital jitter meter.
Portable data logger is first to be IPv6-ready
Portable data logger has a powerful range of communications capabilities, and is the world's first measuring instrument to support the Internet Protocol Version 6 ready logo.
The VC200 is the only tester that satisfies the test requirements of 3GPP, the standards body for UMTS.
The VC200 is a compact benchtop unit with a large built-in LCD display.
Transmission frequency range is 2100 to 2170 MHz and receiver frequency range is 1920 to 1980 MHz, both adjustable in 200 kHz steps.
RF output level is -110 to -10 dBm (0.1 dB steps) and output accuracy is +/-1.5 dB from +5C to +35C.
Maximum input level is +35 dBm, and sensitivity is better than -70 dBm.
In addition to its performance and ease of use, the VC200 is the only dedicated mobile phone tester that allows the firmware to be upgraded via the Internet or USB memory.
Simply changing the internal profile allows the VC200 to test every commercially available UMTS phone, and all new phones and protocols can be supported as they are introduced.
In addition to the automatic test mode, the VC200 offers a manual test mode in which individual test items can be selected and tested under different output and input conditions.
The instrument also has a dedicated TX/RX tester mode which allows it to be used as a physical layer generator and analyser.
About Yokogawa Test and Measurement Yokogawa Test and Measurement Division, which trades in Europe under the name of Yokogawa Measurement Technologies, is a major worldwide force in the test and measurement market, with products that include portable test instruments, recorders and data-acquisition systems, semiconductor-related test systems, oscilloscopes, power meters, and wireless and optical communications test equipment (Ando Electric Co, .) Yokogawa Measurement Technologies is the new identity that has been created for the electronic test and measurement activities of Yokogawa within Europe.
Yokogawa has recently restructured its measurement business following the acquisition of Ando Electric Co, ., which has created a major world force in the test and measurement market.
The acquisition is the first stage in Yokogawa's plans to become one of the top three test and measurement suppliers in the world by 2008.
• Yokogawa Europe - Test and Measurement: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
