Product category:
Slip, trip and fall protection
News Release from: Zarges (UK) | Subject: Safety Legs
Edited by the Manufacturingtalk Editorial
Team on 28 May 2007
New safety legs from Zarges
Zarges' latest ladder safety product is now released.
Safety Legs is an aluminium ladder stability system which can be used to enhance the stability of almost any leaning ladder, combination ladder or stepladder Available in pairs in three sizes, Safety Legs will provide stability by effectively increasing the base width of the ladder or stepladder
This article was originally published on Manufacturingtalk on 15 Jun 2007 at 8.00am (UK)
Related stories
Mobile elevated work platform folds into van
The compact, mobile elevated work platform (MEWP) range from Zarges UK can easily be transported in commercial vans once folded up.
A pair of telescopic legs is bolted to the stile sides of the ladder or stepladder; the larger version will fit all 2 and 3-part ladders and two small versions are designed for smaller ladders.
Once the Safety Legs are attached to the ladder, operation is easy.
The extra legs pull out from the retaining clamp and can be extended by twisting.
Rubber feet 'self-level' on the ground and the Safety Legs are then locked by a further twist.
Storage is similarly straight-forward and with the legs retracted they clip back into the sides of the ladder stiles.
Safety Legs will increase the stability of most ladders and steps.
They are just one in a large range of access equipment which Zarges supplies for safe working at height.
• Zarges (UK): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
