Product category:
Drives, motors and power transmission, couplings, clutches
News Release from: Zeitlauf UK | Subject: Gears
Edited by the Manufacturingtalk Editorial
Team on 26 June 2007
Gears delivers high torque in a small
profile
Zeitlauf has announced EtaCrown gears: compact, high torque and silent running power transmission they claim could replace worm gears in some cases.
Zeitlauf has unveiled a gearhead that could spell the end of the worm gear in certain applications The EtaCrown delivers high torque in a small profile gearmotor, is almost silent and has incredibly high efficiency
This article was originally published on Manufacturingtalk on 31 Oct 2006 at 8.00am (UK)
Related stories
Long-life gearmotor range extended to 32mm
Gearmotors, which combine high power density with near-silent running, now include 32mm diameter models and comprise a long-life permanent magnet DC motor.
Noiseless gear motors for demanding situations
Already renowned for their quiet operation, Zeitlauf's Performax gearmotors are now available in special noiseless versions for particularly demanding applications.
Key benefits of the gearmotors are the compact size, high torque and near silent running.
They can be flush mounted making them ideal for applications such as door actuation and they will also find many applications in the medical industry and other applications.
Unlike worm gearboxes, the losses from the EtaCrown are minimised.
For example, the single stage box delivers a staggering 92 percent efficiency, while even the two stage version gives 80 percent.
A typical worm gear has no better than 50-60 percent efficiency.
There is also no axial displacement between the drive shaft and the geared output shaft.
This shaft also has two bearings and hence delivers high radial load capacity.
Gears are almost as fundamental for delivering mechanical advantage as the pulley and the lever, but the EtaCrown represents a breakthrough - albeit from an original design patented shortly after the turn of the last century.
In spite of the age-old design, nobody had been able to manufacture the new style of crown gear on which the gearbox relies.
Indeed, it took Zeitlauf 10 years of development to perfect the manufacture.
The EtaCrown has power transmitted to its primary spur gear via single or two-stage helical gears made from high strength acetal resin.
These run within a helical ring gear and the use of the plastics material is one of the factors in the near silent running of the machine.
Options of a metal crown or an acetal resin crown are also offered, both options driven by a metal spur.
It is the geometry of the tooth form on the crown gear that enables the high torque transmission.
Each tooth tapers from a 40deg angle to 10deg moving from the outside edge towards the centre.
The crown gear can be fitted with a single shaft, double shaft and a range of options including hollow shafts.
The gearboxes come with reductions from 4:1 with a torque of 1.1Nm up to a 113:1 reduction delivering 10Nm torque.
Higher ratio's and torque are available on request.
They come as standard equipped with an ebm-papst motor, but can be fitted with all common AC, DC or EC motors.
• Zeitlauf UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
