Product category:
Materials Testing
News Release from: Zwick Roell | Subject: Zwicki-Line universal testing machines
Edited by the Manufacturingtalk Editorial
Team on 15 November 2007
Universal material testing machines
offer choice
To satisfy most applications and requirements for testing materials and components, four universal testing machines are available up to 5kN and in three height variations.
Zwick has expanded its zwicki-Line universal testing machines They are available in four load capacities (500N, 1kN, and 2.5kN, and a new 5kN model) and three different height combinations to suit most applications and laboratory requirements for testing materials and components
This article was originally published on Manufacturingtalk on 3 Mar 2006 at 8.00am (UK)
Related stories
Electromechanical 1200kN machine tests steel
In order to meet the growing needs of the steel industry, a range of electromechanical universal testing machines has been extended to 1200kN for tensile, compression, and bend tests.
Universal steel testing machines' capacity doubled
For tensile, compression, and bend tests on steel specimens and components, the maximum capacity of electro-mechanical universal testing machines has been doubled to 1200kN.
Flexible, reliable, and offering excellent value for money, these new products are now fitted with Zwick's latest testControl system.
Depending on the model, test and crosshead positioning speeds up to 3000mm/min enable high speed tests or short cycle times, such as the testing of elastomers and springs.
Zwick's novel environment system speeds up testing by recording all important machine data including the current crosshead position and limit switch positions - even if the machine is switched off.
Further reading
Universal pendulum impact machine tests plastics
A universal pendulum impact tester for Charpy, Izod, tensile impact and Dynstat tests on plastics offers the highest level of integrity and traceability of results ever seen in such instruments.
Machine performs penetration tests on plastics
An automatic testing machine carries out penetration tests on rectangular plastics to ISO and ASTM Standards and software includes management of generated data, and control and process visualisation.
Materials test software is intelligent, reliable
Intelligence and reliability are the two most prominent characteristics of a standardised software platform applicable to static as well as dynamic materials tests and many other uses.
It eliminates much of the set-up time encountered with traditional systems, said Zwick.
* More accuracy and consistency - the load frame compliance can be compensated automatically thereby increasing the accuracy and consistency of compression/flexural test results.
Correction is carried out in real time directly in the machine controller, whilst the adaptive drive control ensures the optimum response and performance from the drive system.
These advanced features, said Zwick to manufacturingtalk.com, ensure that machine control and test results are of the highest possible integrity.
The zwicki can be transported to perform tests outside of the typical laboratory environment.
It can be operated in 'stand-alone' mode using the optional color display with storage of data in the electronics.
Also, as it requires no special interface cards and complicated setup procedures, it can be connected to any commercially available PC or laptop.
To prevent ingress of liquids and conducting materials testControl is attached to the side of the load frame.
A small machine 'footprint' ensures optimum portability and use of valuable laboratory bench space.
* Modular software - Zwick's testXpert II software guarantees the highest quality, reliability, and convenience.
The modular design allows tests to be easily configured and stored, and is used by all major industries worldwide.
A specific benefit to organizations in the medical field is that all actions during the test can be logged ensuring that the test results are fully traceable to FDA requirements.
testXpert II can be fully integrated into existing IT structures and test results can be processed, printed, transmitted by email, or exported to external database systems.
The zwicki line products are typically used to test plastics, elastomers, foils, composite materials, paper, cardboard, textiles, foams, wires, food products, or functional testing of components.
* About the Zwick Roell Group - the Zwick Roell Group is a global leader in automated materials and component testing systems.
With 150 years of testing experience and operating worldwide, it has manufacturing facilities in Germany and distribution and customer support headquarters in Atlanta, Georgia, USA, and Singapore.
As of 2006 the group has 900 employees and sells to 20 different industry sectors through a network of sales and service offices in 56 countries. Request a free brochure from Zwick Roell ...
• Zwick Roell: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
