Product category:
Electronics manufacturing: quality control equipment, software
News Release from: Zwick Testing Machines | Subject: Testing lead-free soldered joints
Edited by the Manufacturingtalk Editorial
Team on 28 April 2006
Lead-free solder connections tested
reliably
Lead-free soldering will soon be mandatory in the EU (EU guideline 2002/95/EG) and to ensure lead-free solder connections are tested relaibly,standard and customised machines are available.
As of July 1, 2006, lead-free soldering will be mandatory in the EU (EU guideline 2002/95/EG) Manufacturers are now having to replace traditional solders made from Sn60Pb40 with SnAg or SnAgCu and introduce these into the production process
This article was originally published on Manufacturingtalk on 17 Jan 2003 at 8.00am (UK)
Related stories
Robotic tester frees technicians for skilled work
Thought to be the first of its type in the UK tyre industry, a robotic digital testing machine has improved operational efficiency and freed technicians for more skilled work.
Digital machine tests solenoids automatically
Claiming to be the first digital machine for testing on-off switching and proportional solenoid actuators, it applies and measures force and electrical values simultaneously.
The use of elements such as tin, silver, and copper in place of lead presents a number of challenges including higher processing temperatures, reduced time for the melting process, the multitude of new solder metals with various properties, and the lack of long-term experience regarding the reliability of lead-free solder connections.
One way to prevent failures is through an efficient materials testing program.
However, a new problem is emerging during the soldering process, particularly for components with high thermal capacity such as connectors.
Further reading
Novel machine performs axial and torsion testing
Axial and torsion testing is carried out on a variety of materials or components that flex in different directions under load, in combination or separately, on a novel testing machine.
Torsional tester is designed for many materials
A new generation of testing machines to study the torsional influence on materials and components feature easy operation, flexibility and accuracy in testing metallics, plastics and products.
In these cases the heat is conducted away from the soldering point resulting in a lower temperature than required.
If the solder does not melt completely during the specified time then a bad joint is created, and the required mechanical strength is not achieved.
Dry joints and solder joints containing microscopic hairline cracks appear between printed circuit board and component, and over the lifetime of the board such solder joints are often the cause of broken electrical connections which reduce in-service reliability, and cause inevitable follow-up costs.
Zwick provides tailored testing solutions to solve these problems, and the ProLine testing machines were developed especially for such component testing and in order to meet the increasing demand for high quality and affordable testing machines in quality assurance environments.
The ProLine boasts a wide range of accessories including specimen grips, compression and flexure test kits, as well as special testing kits and associated tools and fixtures enabling tests on solder to be configured with ease.
Tensile tests allow qualitative measurements of the mechanical strength of solder joints.
Special fixtures such as quick-action vises or T-slot base plates enable tests on an assembled printed circuit board to be carried out quickly, accurately, and efficiently.
A compound table can also be provided to facilitate testing of multiple components on a single printed circuit board.
In addition, durability tests allow a statement to be made concerning the long-term performance of a solder connection by subjecting the connectors to fatigue.
As with all Zwick materials testing machines, the ProLine is designed to operate with the universal testing software testXpert II, which controls the complete test sequence including monitoring of all safety systems in real time.
This ensures that operator safety is ensured at all times. Request a free brochure from Zwick Testing Machines ...
• Zwick Testing Machines: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
